Servo auto override PCB

Instructions for use

To set the threshold voltage at which the servo control will be switched, press and hold the up or down button until an indication with the letter “U” appears (U12.7 for example). In this mode, the display shows the current battery voltage.

Press and hold the up or down button until the letter “t” appears in the display (t11.2 for example). In this mode, the display shows the voltage threshold below which the servo control will be transferred to the device. By pressing the up or down buttons, you can change this threshold. The threshold value will be displayed on the display. To make the device remember the desired position of the servo, set the desired position using the remote control and press the “M” button. The saving of position will be confirmed by one time flashing on the last dot on the display (t11.2. for example).

To return the device to normal mode, simply do not press the buttons for a few seconds.

If the battery voltage drops below the set threshold and remains lower for 10 seconds, the servo control will be transferred to the device, after which the servo will be moved to the previously saved position.

Instructions:

https://carpediemonline.co.za/wp-content/uploads/2025/02/Servo-bb.pdf