PWM Relay Switch 2 in 1 Remote Control Light Electronic On-off

1PCS PWM Relay Switch 2 in 1 Remote Control Light Electronic On-off Module for RC Model Airplane Drone 5V Receiver DIY Parts

Features:

– Only supports 5V voltage receiver, otherwise the module may be damaged. If the receiver and steering gear use high voltage system, you should add a step-down module to the relay

– 1 channel of steering gear signal input, control 2 channels of electronic switches

– 2 outputs

– Compatible with remote control equipment of various brands without calibration

– This device does not need calibration and can be accurately compatible with remote control devices of various brands.

Scope of application:

– Remote control model rocket launch

– Remote control model smoke control

– Weapon system control like real machine

– Aviation light control of model aircraft

– Control of various remote switch systems

Function description:

-This remote switch remotely controls up to 2 electrical equipment on the aircraft model through a switch channel on the remote control

-This device uses receiver power supply, external power supply, only for controlled equipment.

Typical application:

1. Connect

Insert the signal input cable into an idle receiver channel, which corresponds to a switch on the remote control.

Connect the control switch to the device

2. Trigger

(Take the throttle channel as an example) Turn the throttle lever on the remote control to full throttle, and a relay is closed (that is, the wiring at both ends is connected). Turn the throttle lever on the remote control to half throttle, neither relay is closed (neither relay is connected). Move the throttle lever on the remote control to the minimum throttle, and the other relay is closed (that is, the wiring at both ends is connected).

Package include:

1pcs x Relay